April 15th, 2014
That application will be the BT ISO DIN
Read more...
April 12th, 2014
2013 uses the BT ISO DIN harness. Be sure to hook up the blue trigger wire to turn on the factory amp if it
Read more...
April 9th, 2014
That year International can sometimes have more than one possible harness. In you case you might try looking farther down the factory
harness to see if it is plugged into the mate we have on your radio, as the pic shows.
This might not be the case as stated there could be more than one harness that might fit this year. If you need farther help, give us a
Read more...
harness to see if it is plugged into the mate we have on your radio, as the pic shows.
This might not be the case as stated there could be more than one harness that might fit this year. If you need farther help, give us a
Read more...
March 31st, 2014
If you are sure that your truck has this data link connector, this means that the radio is controlled by the computer. It feeds the ignition power to the radio to turn it on. Aftermarket radios will tell the computer that it needs more power to tun on and usually flag the computer, showing an error in the computer. The work around would be to feed your new radio with its own source of ignition power and not the one the computer is doing. Be sure to fuse the new ignition power feed. The only wire you have to deal with is the ignition wire. The rest of the wires in the harness should be okay. Be sure to cap the wire coming from the computer to the radio if you tap at the
Read more...