October 1st, 2020
Not aware of any offerings. You can set up your own with a radios preamp outputs to run a seperate amp. That amp is usually controlled by the blue/white wire from the radios harness. If you toggle this wire before the amp it will turn off the amp. This will give you a seperatecontble set of channels for your speakers. HINT use a digital amp that will be small to run your speakers. These style of amps draw very little current and will give you a powerful sound. Hope this
Read more...
September 24th, 2020
Don't have a lot of info on the HINO truck. You can always send me a pic to 3365289198 and tag it with make, model and year. We are finding new applications every few months and listing them as soon as we know the
Read more...
September 24th, 2020
Our Guide shows Freightliner uses only 2 sizes in general. 51/4" or
Read more...
September 9th, 2020
We sure do. Check out the one here for the Pete. It is also available for the Kenworth as well. Notice the antenna adaptor. The Smart Nav uses a antenna connector similar to a SAT antenna connector. If yours uses this you will need it as well. These harnesses will allow you to install a standard DIN size radio that will powerup and play on all the speakers. You will loose the communication with the screen. Once it is unplugged from the factory radio it will be dead. Some will elect to leave it just to hold the openinfrom having a big
Read more...
September 1st, 2020
Sorry don't have that info. The wires should have numbers on them that can be ID thru the brands service
Read more...